9. cdist(1)

9.1. NAME

cdist - Usable Configuration Management

9.2. SYNOPSIS

cdist [-h] [-d] [-v] [-V] {banner,config,shell,install} ...

cdist banner [-h] [-d] [-v]

cdist config [-h] [-d] [-v] [-b] [-c CONF_DIR] [-f HOSTFILE]
             [-i MANIFEST] [-j [JOBS]] [-n] [-o OUT_PATH] [-p] [-s]
             [--remote-copy REMOTE_COPY] [--remote-exec REMOTE_EXEC]
             [host [host ...]]

cdist install [-h] [-d] [-v] [-b] [-c CONF_DIR] [-f HOSTFILE]
              [-i MANIFEST] [-j [JOBS]] [-n] [-o OUT_PATH] [-p] [-s]
              [--remote-copy REMOTE_COPY] [--remote-exec REMOTE_EXEC]
              [host [host ...]]

cdist shell [-h] [-d] [-v] [-s SHELL]

9.3. DESCRIPTION

cdist is the frontend executable to the cdist configuration management. It supports different subcommands as explained below.

It is written in Python so it requires python(1) to be installed. It requires a minimal Python version 3.2.

9.4. GENERAL

All commands accept the following options:

-h, --help

Show the help screen

-d, --debug

Set log level to debug (deprecated, use -vvv instead)

-v, --verbose

Increase the verbosity level. Every instance of -v increments the verbosity level by one. Its default value is 0. There are 4 levels of verbosity. The order of levels from the lowest to the highest are: ERROR (0), WARNING (1), INFO (2) and DEBUG (3 or higher).

-V, --version

Show version and exit

9.6. CONFIG/INSTALL

Configure/install one or more hosts.

-b, --beta

Enable beta functionalities.

Can also be enabled using CDIST_BETA env var.

-c CONF_DIR, --conf-dir CONF_DIR

Add a configuration directory. Can be specified multiple times. If configuration directories contain conflicting types, explorers or manifests, then the last one found is used. Additionally this can also be configured by setting the CDIST_PATH environment variable to a colon delimited list of config directories. Directories given with the --conf-dir argument have higher precedence over those set through the environment variable.

-f HOSTFILE, --file HOSTFILE

Read additional hosts to operate on from specified file or from stdin if '-' (each host on separate line). If no host or host file is specified then, by default, read hosts from stdin. For the file format see below.

-i MANIFEST, --initial-manifest MANIFEST

Path to a cdist manifest or - to read from stdin

-j [JOBS], --jobs [JOBS]

Specify the maximum number of parallel jobs; currently only global explorers are supported (currently in beta)

-n, --dry-run

Do not execute code

-o OUT_PATH, --out-dir OUT_PATH

Directory to save cdist output in

-p, --parallel

Operate on multiple hosts in parallel

-s, --sequential

Operate on multiple hosts sequentially (default)

--remote-copy REMOTE_COPY

Command to use for remote copy (should behave like scp)

--remote-exec REMOTE_EXEC

Command to use for remote execution (should behave like ssh)

9.6.1. HOSTFILE FORMAT

HOSTFILE contains hosts per line. All characters after and including '#' until the end of line is a comment. In a line, all leading and trailing whitespace characters are ignored. Empty lines are ignored/skipped.

Hostfile line is processed like the following. First, all comments are removed. Then all leading and trailing whitespace characters are stripped. If such a line results in empty line it is ignored/skipped. Otherwise, host string is used.

9.7. SHELL

This command allows you to spawn a shell that enables access to the types as commands. It can be thought as an "interactive manifest" environment. See below for example usage. Its primary use is for debugging type parameters.

-s SHELL, --shell SHELL

Select shell to use, defaults to current shell. Used shell should be POSIX compatible shell.

9.8. FILES

~/.cdist
Your personal cdist config directory. If exists it will be automatically used.
cdist/conf
The distribution configuration directory. It contains official types and explorers. This path is relative to cdist installation directory.

9.9. NOTES

cdist detects if host is specified by IPv6 address. If so then remote_copy command is executed with host address enclosed in square brackets (see scp(1)).

9.10. EXAMPLES

# Configure ikq05.ethz.ch with debug enabled
% cdist config -d ikq05.ethz.ch

# Configure hosts in parallel and use a different configuration directory
% cdist config -c ~/p/cdist-nutzung \
    -p ikq02.ethz.ch ikq03.ethz.ch ikq04.ethz.ch

# Use custom remote exec / copy commands
% cdist config --remote-exec /path/to/my/remote/exec \
    --remote-copy /path/to/my/remote/copy \
    -p ikq02.ethz.ch ikq03.ethz.ch ikq04.ethz.ch

# Configure hosts read from file loadbalancers
% cdist config -f loadbalancers

# Configure hosts read from file web.hosts using 16 parallel jobs
# (beta functionality)
% cdist config -b -j 16 -f web.hosts

# Display banner
cdist banner

# Show help
% cdist --help

# Show Version
% cdist --version

# Enter a shell that has access to emulated types
% cdist shell
% __git
usage: __git --source SOURCE [--state STATE] [--branch BRANCH]
             [--group GROUP] [--owner OWNER] [--mode MODE] object_id

# Install ikq05.ethz.ch with debug enabled
% cdist install -d ikq05.ethz.ch

9.11. ENVIRONMENT

TMPDIR, TEMP, TMP
Setup the base directory for the temporary directory. See http://docs.python.org/py3k/library/tempfile.html for more information. This is rather useful, if the standard directory used does not allow executables.
CDIST_PATH
Colon delimited list of config directories.
CDIST_LOCAL_SHELL
Selects shell for local script execution, defaults to /bin/sh.
CDIST_REMOTE_SHELL
Selects shell for remote script execution, defaults to /bin/sh.
CDIST_OVERRIDE
Allow overwriting type parameters.
CDIST_ORDER_DEPENDENCY
Create dependencies based on the execution order.
CDIST_REMOTE_EXEC
Use this command for remote execution (should behave like ssh).
CDIST_REMOTE_COPY
Use this command for remote copy (should behave like scp).
CDIST_BETA
Enable beta functionalities.

9.12. EXIT STATUS

The following exit values shall be returned:

0 Successful completion.

1 One or more host configurations failed.

9.13. AUTHORS

Originally written by Nico Schottelius <nico-cdist--@--schottelius.org> and Steven Armstrong <steven-cdist--@--armstrong.cc>.

9.14. CAVEATS

When operating in parallel, either by operating in parallel for each host (-p/--parallel) or by parallel jobs within a host (-j/--jobs), and depending on target SSH server and its configuration you may encounter connection drops. This is controlled with sshd MaxStartups configuration options. You may also encounter session open refusal. This happens with ssh multiplexing when you reach maximum number of open sessions permitted per network connection. In this case ssh will disable multiplexing. This limit is controlled with sshd MaxSessions configuration options. For more details refer to sshd_config(5).

When requirements for the same object are defined in different manifests (see example below), for example, in init manifest and in some other type manifest and those requirements differ then dependency resolver cannot detect dependencies right. This happens because cdist cannot prepare all objects first and run all objects afterwards. Some object can depend on the result of type explorer(s) and explorers are executed during object run. cdist will detect such case and write warning message. Example for such a case:

init manifest:
    __a a
    require="__e/e" __b b
    require="__f/f" __c c
    __e e
    __f f
    require="__c/c" __d d
    __g g
    __h h

type __g manifest:
    require="__c/c __d/d" __a a

Warning message:
    WARNING: cdisttesthost: Object __a/a already exists with requirements:
    /usr/home/darko/ungleich/cdist/cdist/test/config/fixtures/manifest/init-deps-resolver /tmp/tmp.cdist.test.ozagkg54/local/759547ff4356de6e3d9e08522b0d0807/data/conf/type/__g/manifest: set()
    /tmp/tmp.cdist.test.ozagkg54/local/759547ff4356de6e3d9e08522b0d0807/data/conf/type/__g/manifest: {'__c/c', '__d/d'}
    Dependency resolver could not handle dependencies as expected.

9.15. COPYING

Copyright (C) 2011-2017 Nico Schottelius. Free use of this software is granted under the terms of the GNU General Public License v3 or later (GPLv3+).